1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165 |
- #
- # Asterisk -- An open source telephony toolkit.
- #
- # Top level Makefile
- #
- # Copyright (C) 1999-2010, Digium, Inc.
- #
- # Mark Spencer <markster@digium.com>
- #
- # This program is free software, distributed under the terms of
- # the GNU General Public License
- #
- # All Makefiles use the following variables:
- #
- # ASTCFLAGS - compiler options provided by the user (if any)
- # _ASTCFLAGS - compiler options provided by the build system
- # ASTLDFLAGS - linker flags (not libraries) provided by the user (if any)
- # _ASTLDFLAGS - linker flags (not libraries) provided by the build system
- # LIBS - additional libraries, at top-level for all links,
- # on a single object just for that object
- # SOLINK - linker flags used only for creating dynamically loadable modules
- # as .so files
- # DYLINK - linker flags used only for creating shared libraries
- # (.so files on Unix-type platforms, .dylib on Darwin)
- #
- # Values for ASTCFLAGS and ASTLDFLAGS can be specified in the
- # environment when running make, as follows:
- #
- # $ ASTCFLAGS="-Werror" make ...
- #
- # or as a variable value on the make command line itself:
- #
- # $ make ASTCFLAGS="-Werror" ...
- export ASTTOPDIR # Top level dir, used in subdirs' Makefiles
- export ASTERISKVERSION
- export ASTERISKVERSIONNUM
- #--- values used for default paths
- # DESTDIR is the staging (or final) directory where files are copied
- # during the install process. Define it before 'export', otherwise
- # export will set it to the empty string making ?= fail.
- # Trying to run asterisk from the DESTDIR is completely unsupported
- # behavior.
- # WARNING: do not put spaces or comments after the value.
- DESTDIR?=$(INSTALL_PATH)
- export DESTDIR
- export INSTALL_PATH # Additional prefix for the following paths
- export ASTCACHEDIR
- export ASTETCDIR # Path for config files
- export ASTVARRUNDIR
- export ASTSPOOLDIR
- export ASTVARLIBDIR
- export ASTDATADIR
- export ASTDBDIR
- export ASTLOGDIR
- export ASTLIBDIR
- export ASTMODDIR
- export ASTMANDIR
- export ASTHEADERDIR
- export ASTSBINDIR
- export AGI_DIR
- export ASTCONFPATH
- export ASTKEYDIR
- export OSARCH # Operating system
- export NOISY_BUILD # Used in Makefile.rules
- export MENUSELECT_CFLAGS # Options selected in menuselect.
- export AST_DEVMODE # Set to "yes" for additional compiler
- # and runtime checks
- export AST_DEVMODE_STRICT # Enables shadow warnings (-Wshadow)
- export _SOLINK # linker flags for all shared objects
- export SOLINK # linker flags for loadable modules
- export DYLINK # linker flags for shared libraries
- #--- paths to various commands
- # The makeopts include below tries to set these if they're found during
- # configure.
- export CC
- export CXX
- export AR
- export RANLIB
- export HOST_CC
- export BUILD_CC
- export INSTALL
- export STRIP
- export DOWNLOAD
- export AWK
- export GREP
- export MD5
- export WGET_EXTRA_ARGS
- export LDCONFIG
- export LDCONFIG_FLAGS
- export PYTHON
- export TAR
- export PATCH
- export SED
- export NM
- export FIND
- export BASENAME
- export DIRNAME
- export XMLLINT
- export XMLSTARLET
- # makeopts is required unless the goal is just {dist{-}}clean
- ifeq ($(MAKECMDGOALS),clean)
- else ifeq ($(MAKECMDGOALS),distclean)
- else ifeq ($(MAKECMDGOALS),dist-clean)
- else
- include makeopts
- endif
- # start the primary CFLAGS and LDFLAGS with any that were provided
- # to the configure script
- _ASTCFLAGS:=$(CONFIG_CFLAGS) $(CONFIG_SIGNED_CHAR)
- _ASTLDFLAGS:=$(CONFIG_LDFLAGS)
- # Some build systems, such as the one in openwrt, like to pass custom target
- # CFLAGS and LDFLAGS in the COPTS and LDOPTS variables; these should also
- # go before any build-system computed flags, since they are defaults, not
- # overrides
- _ASTCFLAGS+=$(COPTS)
- _ASTLDFLAGS+=$(LDOPTS)
- # libxml2 cflags
- _ASTCFLAGS+=$(LIBXML2_INCLUDE)
- # BIND_8_COMPAT
- _ASTCFLAGS+=$(BIND8_CFLAGS)
- #Uncomment this to see all build commands instead of 'quiet' output
- #NOISY_BUILD=yes
- empty:=
- space:=$(empty) $(empty)
- ASTTOPDIR:=$(subst $(space),\$(space),$(CURDIR))
- # Overwrite config files on "make samples" or other config installation targets
- OVERWRITE=y
- # Include debug and macro symbols in the executables (-g) and profiling info (-pg)
- DEBUG=-g3
- # Asterisk.conf is located in ASTETCDIR or by using the -C flag
- # when starting Asterisk
- ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
- AGI_DIR=$(ASTDATADIR)/agi-bin
- # If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
- HTTP_DOCSDIR=/var/www/html
- # Determine by a grep 'ScriptAlias' of your Apache httpd.conf file
- HTTP_CGIDIR=/var/www/cgi-bin
- # If your platform's linker expects a prefix on symbols generated from compiling C
- # source files, set LINKER_SYMBOL_PREFIX to that value. On some systems, exported symbols
- # from C source files are prefixed with '_', for example. If this value is not set
- # properly, the linker scripts that live in the '*.exports' files in various places
- # in this tree will unintentionally suppress symbols that should be visible
- # in the final binary objects.
- LINKER_SYMBOL_PREFIX=
- # Uncomment this to use the older DSP routines
- #_ASTCFLAGS+=-DOLD_DSP_ROUTINES
- # Default install directory for DAHDI hooks.
- DAHDI_UDEV_HOOK_DIR = /usr/share/dahdi/span_config.d
- # If the file .asterisk.makeopts is present in your home directory, you can
- # include all of your favorite menuselect options so that every time you download
- # a new version of Asterisk, you don't have to run menuselect to set them.
- # The file /etc/asterisk.makeopts will also be included but can be overridden
- # by the file in your home directory.
- ifeq ($(wildcard menuselect.makeopts),)
- USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
- GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
- else
- USER_MAKEOPTS=
- GLOBAL_MAKEOPTS=
- endif
- MOD_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
- OTHER_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
- # Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
- OPTIONS=
- ifeq ($(findstring -save-temps,$(_ASTCFLAGS) $(ASTCFLAGS)),)
- ifeq ($(findstring -pipe,$(_ASTCFLAGS) $(ASTCFLAGS)),)
- _ASTCFLAGS+=-pipe
- endif
- endif
- ifeq ($(findstring -Wall,$(_ASTCFLAGS) $(ASTCFLAGS)),)
- _ASTCFLAGS+=-Wall
- endif
- _ASTCFLAGS+=-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(AST_NESTED_FUNCTIONS) $(AST_CLANG_BLOCKS) $(DEBUG)
- ADDL_TARGETS=
- ifeq ($(AST_DEVMODE),yes)
- _ASTCFLAGS+=-Werror
- _ASTCFLAGS+=-Wunused
- _ASTCFLAGS+=$(AST_DECLARATION_AFTER_STATEMENT)
- _ASTCFLAGS+=$(AST_TRAMPOLINES)
- _ASTCFLAGS+=-Wundef
- _ASTCFLAGS+=-Wmissing-format-attribute
- _ASTCFLAGS+=-Wformat=2
- ifeq ($(AST_DEVMODE_STRICT),yes)
- _ASTCFLAGS+=-Wshadow
- endif
- ifneq ($(DISABLE_XMLDOC),yes)
- ADDL_TARGETS+=validate-docs
- endif
- endif
- ifeq ($(OSARCH),NetBSD)
- _ASTCFLAGS+=-isystem /usr/pkg/include
- else ifneq ($(findstring BSD,$(OSARCH)),)
- _ASTCFLAGS+=-isystem /usr/local/include
- endif
- ifeq ($(OSARCH),FreeBSD)
- # -V is understood by BSD Make, not by GNU make.
- BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
- _ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
- endif
- ifeq ($(OSARCH),NetBSD)
- _ASTCFLAGS+=-pthread -D__LIBPTHREAD_SOURCE__ -I/usr/pkg/include
- endif
- ifeq ($(OSARCH),OpenBSD)
- _ASTCFLAGS+=-pthread -ftrampolines
- endif
- ifeq ($(OSARCH),linux-uclibc)
- AST_LIBS+=-lpthread -ldl
- endif
- ifeq ($(OSARCH),SunOS)
- _ASTCFLAGS+=-Wcast-align -DSOLARIS -I../include/solaris-compat -I/opt/ssl/include -I/usr/local/ssl/include -D_XPG4_2 -D__EXTENSIONS__
- endif
- ifeq ($(GREP),)
- else ifeq ($(GREP),:)
- else
- ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) GIT=$(GIT) build_tools/make_version .)
- endif
- ifneq ($(AWK),)
- ifneq ($(wildcard .version),)
- ASTERISKVERSIONNUM:=$(shell $(SED) -e 's/^certified\///' -e 's/-cert/./' .version | $(AWK) -F. '{printf "%01d%02d%02d", $$1, $$2, $$3}')
- endif
- endif
- ifneq ($(wildcard .svn),)
- ASTERISKVERSIONNUM:=999999
- endif
- ifneq ($(DISABLE_XMLDOC),yes)
- CORE_XMLDOC=doc/core-en_US.xml
- FULL_XMLDOC=doc/full-en_US.xml
- else
- CORE_XMLDOC=
- FULL_XMLDOC=
- endif
- _ASTCFLAGS+=$(OPTIONS)
- MOD_SUBDIRS:=third-party channels pbx apps codecs formats cdr cel bridges funcs tests main res addons $(LOCAL_MOD_SUBDIRS)
- OTHER_SUBDIRS:=utils agi contrib
- SUBDIRS:=$(OTHER_SUBDIRS) $(MOD_SUBDIRS)
- SUBDIRS_INSTALL:=$(SUBDIRS:%=%-install)
- SUBDIRS_CLEAN:=$(SUBDIRS:%=%-clean)
- SUBDIRS_DIST_CLEAN:=$(SUBDIRS:%=%-dist-clean)
- SUBDIRS_UNINSTALL:=$(SUBDIRS:%=%-uninstall)
- MOD_SUBDIRS_MENUSELECT_TREE:=$(MOD_SUBDIRS:%=%-menuselect-tree)
- ifneq ($(findstring darwin,$(OSARCH)),)
- _ASTCFLAGS+=-D__Darwin__ -mmacosx-version-min=10.6
- _SOLINK=-mmacosx-version-min=10.6 -Wl,-undefined,dynamic_lookup
- _SOLINK+=/usr/lib/bundle1.o
- SOLINK=-bundle $(_SOLINK)
- DYLINK=-Wl,-dylib $(_SOLINK)
- _ASTLDFLAGS+=-L/usr/local/lib
- else
- # These are used for all but Darwin
- SOLINK=-shared
- DYLINK=$(SOLINK)
- ifeq ($(OSARCH),NetBSD)
- _ASTLDFLAGS+=-L/usr/pkg/lib
- else ifneq ($(findstring BSD,$(OSARCH)),)
- _ASTLDFLAGS+=-L/usr/local/lib
- endif
- endif
- # Include rpath settings
- _ASTLDFLAGS+=$(AST_RPATH)
- ifeq ($(OSARCH),SunOS)
- SOLINK=-shared -fpic -L/usr/local/ssl/lib -lrt
- DYLINK=$(SOLINK)
- endif
- ifeq ($(OSARCH),OpenBSD)
- SOLINK=-shared -fpic
- DYLINK=$(SOLINK)
- endif
- # comment to print directories during submakes
- #PRINT_DIR=yes
- ifneq ($(INSIDE_EMACS),)
- PRINT_DIR=yes
- endif
- SILENTMAKE:=$(MAKE) --quiet --no-print-directory
- ifneq ($(PRINT_DIR)$(NOISY_BUILD),)
- SUBMAKE:=$(MAKE)
- else
- SUBMAKE:=$(MAKE) --quiet --no-print-directory
- endif
- mkfile_path := $(abspath $(lastword $(MAKEFILE_LIST)))
- mkfile_dir := $(dir $(mkfile_path))
- # $(MAKE) is printed in several places, and we want it to be a
- # fixed size string. Define a variable whose name has also the
- # same size, so we can easily align text.
- ifeq ($(MAKE), gmake)
- mK="gmake"
- else
- mK=" make"
- endif
- all: _all
- @echo " +--------- Asterisk Build Complete ---------+"
- @echo " + Asterisk has successfully been built, and +"
- @echo " + can be installed by running: +"
- @echo " + +"
- @echo " + $(mK) install +"
- @echo " +-------------------------------------------+"
- full: _full
- @echo " +--------- Asterisk Build Complete ---------+"
- @echo " + Asterisk has successfully been built, and +"
- @echo " + can be installed by running: +"
- @echo " + +"
- @echo " + $(mK) install +"
- @echo " +-------------------------------------------+"
- _all: makeopts $(SUBDIRS) $(CORE_XMLDOC) $(ADDL_TARGETS)
- _full: makeopts $(SUBDIRS) $(FULL_XMLDOC) $(ADDL_TARGETS)
- makeopts: configure
- @echo "****"
- @echo "**** The configure script must be executed before running '$(MAKE)'."
- @echo "**** Please run \"./configure\"."
- @echo "****"
- @exit 1
- menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts build_tools/menuselect-deps $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
- ifeq ($(filter %.menuselect,$(MAKECMDGOALS)),)
- menuselect/menuselect --check-deps $@
- menuselect/menuselect --check-deps $@ $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
- endif
- $(MOD_SUBDIRS_MENUSELECT_TREE):
- +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) moduleinfo
- +@$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) makeopts
- $(SUBDIRS): makeopts .lastclean main/version.c include/asterisk/build.h defaults.h
- ifeq ($(findstring $(OSARCH), mingw32 cygwin ),)
- main: third-party
- else
- # Windows: we need to build main (i.e. the asterisk dll) first,
- # followed by res, followed by the other directories, because
- # dll symbols must be resolved during linking and not at runtime.
- D1:= $(filter-out main,$(MOD_SUBDIRS))
- D1:= $(filter-out res,$(D1))
- $(D1): res
- res: main
- endif
- $(MOD_SUBDIRS): makeopts
- +@_ASTCFLAGS="$(MOD_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
- $(OTHER_SUBDIRS): makeopts
- +@_ASTCFLAGS="$(OTHER_SUBDIR_CFLAGS) $(_ASTCFLAGS)" ASTCFLAGS="$(ASTCFLAGS)" _ASTLDFLAGS="$(_ASTLDFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
- defaults.h: makeopts .lastclean build_tools/make_defaults_h
- @build_tools/make_defaults_h > $@.tmp
- @cmp -s $@.tmp $@ || mv $@.tmp $@
- @rm -f $@.tmp
- main/version.c: FORCE include/asterisk/buildopts.h menuselect.makeopts .lastclean
- @build_tools/make_version_c > $@.tmp
- @cmp -s $@.tmp $@ || mv $@.tmp $@
- @rm -f $@.tmp
- include/asterisk/buildopts.h: menuselect.makeopts .lastclean
- @build_tools/make_buildopts_h > $@.tmp
- @cmp -s $@.tmp $@ || mv $@.tmp $@
- @rm -f $@.tmp
- # build.h must depend on .lastclean, or parallel make may wipe it out after it's
- # been created.
- include/asterisk/build.h: .lastclean
- @build_tools/make_build_h > $@
- $(SUBDIRS_CLEAN):
- +@$(SUBMAKE) -C $(@:-clean=) clean
- $(SUBDIRS_DIST_CLEAN):
- +@$(SUBMAKE) -C $(@:-dist-clean=) dist-clean
- clean: $(SUBDIRS_CLEAN) _clean
- _clean:
- rm -f defaults.h
- rm -f include/asterisk/build.h
- rm -f main/version.c
- rm -f doc/core-en_US.xml
- rm -f doc/full-en_US.xml
- rm -f doc/rest-api/*.wiki
- rm -f doxygen.log
- rm -rf latex
- rm -f rest-api-templates/*.pyc
- @$(MAKE) -C menuselect clean
- cp -f .cleancount .lastclean
- dist-clean: distclean
- distclean: $(SUBDIRS_DIST_CLEAN) _clean
- @$(MAKE) -C menuselect dist-clean
- @$(MAKE) -C sounds dist-clean
- rm -f menuselect.makeopts makeopts menuselect-tree menuselect.makedeps
- rm -f config.log config.status config.cache
- rm -rf autom4te.cache
- rm -f include/asterisk/autoconfig.h
- rm -f include/asterisk/buildopts.h
- rm -rf doc/api
- rm -f doc/Doxyfile
- rm -f build_tools/menuselect-deps
- datafiles: _all $(CORE_XMLDOC)
- CFLAGS="$(_ASTCFLAGS) $(ASTCFLAGS)" build_tools/mkpkgconfig "$(DESTDIR)$(libdir)/pkgconfig";
- # # Recursively install contents of the static-http directory, in case
- # # extra content is provided there. See contrib/scripts/get_swagger_ui.sh
- find static-http | while read x; do \
- if test -d $$x; then \
- $(INSTALL) -m 755 -d "$(DESTDIR)$(ASTDATADIR)/$$x"; \
- else \
- $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/$$x" ; \
- fi \
- done
- ifneq ($(DISABLE_XMLDOC),yes)
- $(INSTALL) -m 644 doc/core-en_US.xml "$(DESTDIR)$(ASTDATADIR)/static-http";
- $(INSTALL) -m 644 doc/appdocsxml.xslt "$(DESTDIR)$(ASTDATADIR)/static-http";
- endif
- if [ -d doc/tex/asterisk ] ; then \
- $(INSTALL) -d "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
- for n in doc/tex/asterisk/* ; do \
- $(INSTALL) -m 644 $$n "$(DESTDIR)$(ASTDATADIR)/static-http/docs" ; \
- done \
- fi
- for x in images/*.jpg; do \
- $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/images" ; \
- done
- $(MAKE) -C sounds install
- find rest-api -name "*.json" | while read x; do \
- $(INSTALL) -m 644 $$x "$(DESTDIR)$(ASTDATADIR)/rest-api" ; \
- done
- DOC_MOD_SUBDIRS := $(filter-out third-party,$(MOD_SUBDIRS))
- XML_core_en_US := $(shell build_tools/make_xml_documentation --command=print_dependencies --source-tree=. --mod-subdirs="$(DOC_MOD_SUBDIRS)")
- # core-en_US.xml is the normal documentation created with asterisk builds.
- doc/core-en_US.xml: makeopts .lastclean $(XML_core_en_US)
- @build_tools/make_xml_documentation --command=create_xml --source-tree=. --mod-subdirs="$(DOC_MOD_SUBDIRS)" \
- --with-moduleinfo --output-file=$@
- # The full-en_US.xml target is only called by the wiki documentation generation process
- # and does special post-processing in preparation for uploading to the wiki.
- # It creates full-en_US.xml but then re-creates core-en_US.xml as well.
- doc/full-en_US.xml: makeopts .lastclean $(XML_core_en_US)
- ifeq ($(PYTHON),:)
- @echo "--------------------------------------------------------------------------"
- @echo "--- Please install python to build full documentation ---"
- @echo "--------------------------------------------------------------------------"
- else
- @build_tools/make_xml_documentation --command=create_xml --source-tree=. --mod-subdirs="$(DOC_MOD_SUBDIRS)" \
- --for-wiki --output-file=$@ --core-output-file=./doc/core-en_US.xml
- endif
- validate-docs: doc/core-en_US.xml
- ifeq ($(XMLSTARLET)$(XMLLINT),::)
- @echo "--------------------------------------------------------------------------"
- @echo "--- Please install xmllint or xmlstarlet to validate the documentation ---"
- @echo "--------------------------------------------------------------------------"
- else
- ifneq ($(XMLLINT),:)
- $(XMLLINT) --dtdvalid doc/appdocsxml.dtd --noout $<
- else
- $(XMLSTARLET) val -d doc/appdocsxml.dtd $<
- endif
- endif
- update:
- @if [ -d .svn ]; then \
- echo "Updating from Subversion..." ; \
- fromrev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
- svn update | tee update.out; \
- torev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
- echo "`date` Updated from revision $${fromrev} to $${torev}." >> update.log; \
- rm -f .version; \
- if [ `grep -c ^C update.out` -gt 0 ]; then \
- echo ; echo "The following files have conflicts:" ; \
- grep ^C update.out | cut -b4- ; \
- fi ; \
- rm -f update.out; \
- else \
- echo "Not under version control"; \
- fi
- NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
- OLDHEADERS=$(filter-out $(NEWHEADERS) $(notdir $(DESTDIR)$(ASTHEADERDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
- INSTALLDIRS="$(ASTLIBDIR)" "$(ASTMODDIR)" "$(ASTSBINDIR)" "$(ASTCACHEDIR)" "$(ASTETCDIR)" "$(ASTVARRUNDIR)" \
- "$(ASTSPOOLDIR)" "$(ASTSPOOLDIR)/dictate" "$(ASTSPOOLDIR)/meetme" \
- "$(ASTSPOOLDIR)/monitor" "$(ASTSPOOLDIR)/system" "$(ASTSPOOLDIR)/tmp" \
- "$(ASTSPOOLDIR)/voicemail" "$(ASTSPOOLDIR)/recording" \
- "$(ASTLOGDIR)" "$(ASTLOGDIR)/cdr-csv" "$(ASTLOGDIR)/cdr-custom" \
- "$(ASTLOGDIR)/cel-custom" "$(ASTDATADIR)" "$(ASTDATADIR)/documentation" \
- "$(ASTDATADIR)/documentation/thirdparty" "$(ASTDATADIR)/firmware" \
- "$(ASTDATADIR)/firmware/iax" "$(ASTDATADIR)/images" "$(ASTDATADIR)/keys" \
- "$(ASTDATADIR)/phoneprov" "$(ASTDATADIR)/rest-api" "$(ASTDATADIR)/static-http" \
- "$(ASTDATADIR)/sounds" "$(ASTDATADIR)/moh" "$(ASTMANDIR)/man8" "$(AGI_DIR)" "$(ASTDBDIR)" \
- "$(ASTDATADIR)/third-party" "${ASTDATADIR}/keys/stir_shaken" "${ASTDATADIR}/keys/stir_shaken/cache"
- installdirs:
- @for i in $(INSTALLDIRS); do \
- if [ ! -z "$${i}" -a ! -d "$(DESTDIR)$${i}" ]; then \
- $(INSTALL) -d "$(DESTDIR)$${i}"; \
- fi; \
- done
- main-bininstall:
- +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main bininstall
- bininstall: _all installdirs $(SUBDIRS_INSTALL) main-bininstall
- $(INSTALL) -m 755 contrib/scripts/astversion "$(DESTDIR)$(ASTSBINDIR)/"
- $(INSTALL) -m 755 contrib/scripts/astgenkey "$(DESTDIR)$(ASTSBINDIR)/"
- $(INSTALL) -m 755 contrib/scripts/autosupport "$(DESTDIR)$(ASTSBINDIR)/"
- ifneq ($(HAVE_SBIN_LAUNCHD),1)
- ./build_tools/install_subst contrib/scripts/safe_asterisk "$(DESTDIR)$(ASTSBINDIR)/safe_asterisk";
- endif
- ifneq ($(DISABLE_XMLDOC),yes)
- $(INSTALL) -m 644 doc/core-*.xml "$(DESTDIR)$(ASTDATADIR)/documentation"
- $(INSTALL) -m 644 doc/appdocsxml.xslt "$(DESTDIR)$(ASTDATADIR)/documentation"
- $(INSTALL) -m 644 doc/appdocsxml.dtd "$(DESTDIR)$(ASTDATADIR)/documentation"
- endif
- $(INSTALL) -m 644 doc/asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
- $(INSTALL) -m 644 doc/astdb*.8 "$(DESTDIR)$(ASTMANDIR)/man8"
- $(INSTALL) -m 644 contrib/scripts/astgenkey.8 "$(DESTDIR)$(ASTMANDIR)/man8"
- $(INSTALL) -m 644 contrib/scripts/autosupport.8 "$(DESTDIR)$(ASTMANDIR)/man8"
- $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 "$(DESTDIR)$(ASTMANDIR)/man8"
- if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
- $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin "$(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin"; \
- fi
- ifeq ($(HAVE_DAHDI),1)
- $(INSTALL) -d $(DESTDIR)/$(DAHDI_UDEV_HOOK_DIR)
- $(INSTALL) -m 644 contrib/scripts/dahdi_span_config_hook $(DESTDIR)$(DAHDI_UDEV_HOOK_DIR)/40-asterisk
- endif
- $(SUBDIRS_INSTALL):
- +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTDATADIR="$(ASTDATADIR)" $(SUBMAKE) -C $(@:-install=) install
- NEWMODS:=$(foreach d,$(MOD_SUBDIRS),$(notdir $(wildcard $(d)/*.so)))
- OLDMODS=$(filter-out $(NEWMODS) $(notdir $(DESTDIR)$(ASTMODDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTMODDIR)/*.so)))
- ifneq ($(BASH),:)
- FILMODS=$(filter-out $(shell ./build_tools/list_valid_installed_externals),$(OLDMODS))
- else
- FILMODS=$(OLDMODS)
- endif
- BADMODS=$(strip $(FILMODS))
- oldmodcheck:
- @if [ -n "$(BADMODS)" ]; then \
- echo " WARNING WARNING WARNING" ;\
- echo "" ;\
- echo " Your Asterisk modules directory, located at" ;\
- echo " $(DESTDIR)$(ASTMODDIR)" ;\
- echo " contains modules that were not installed by this " ;\
- echo " version of Asterisk. Please ensure that these" ;\
- echo " modules are compatible with this version before" ;\
- echo " attempting to run Asterisk." ;\
- echo "" ;\
- for f in $(BADMODS); do \
- echo " $$f" ;\
- done ;\
- echo "" ;\
- echo " WARNING WARNING WARNING" ;\
- fi
- ld-cache-update:
- ifeq ($(LDCONFIG),)
- else ifeq ($(LDCONFIG),:)
- else
- ifeq ($(DESTDIR),) # DESTDIR means binary archive creation; ldconfig should be run on postinst
- @if [ $$(id -u) -eq 0 ] ; then \
- $(LDCONFIG) "$(ASTLIBDIR)/" ; \
- else \
- echo " WARNING WARNING WARNING" ;\
- echo "" ;\
- echo " You cannot rebuild the system linker cache unless you are root. " ;\
- echo " You MUST do one of the following..." ;\
- echo " * Re-run 'make install' as root. " ;\
- echo " * Run 'ldconfig $(ASTLIBDIR)' as root. " ;\
- echo " * Run asterisk with 'LD_LIBRARY_PATH=$(ASTLIBDIR) asterisk' " ;\
- echo "" ;\
- echo " WARNING WARNING WARNING" ;\
- fi
- endif
- endif
- export _oldlibdir =
- export _oldmoddir =
- ifeq ($(findstring 64,$(HOST_CPU)),64)
- # Strip any trailing '/' so the dir and notdir functions work correctly
- _current_libdir = $(patsubst %/,%,$(DESTDIR)$(ASTLIBDIR))
- # Only process if the paths end in lib64 or lib.
- # If we're installing to lib64, check lib for orphans.
- # If we're installing to lib, check lib64 for orphans.
- # Otherwise, leave _oldlibdir empty.
- ifeq ($(notdir $(_current_libdir)),lib64)
- _oldlibdir = $(dir $(_current_libdir))lib
- else ifeq ($(notdir $(_current_libdir)),lib)
- _oldlibdir = $(dir $(_current_libdir))lib64
- endif
- # Strip any trailing '/' so the dir and notdir functions work correctly
- _current_moddir = $(patsubst %/,%,$(DESTDIR)$(ASTMODDIR))
- # Only process if the paths contain /lib64/ or /lib/.
- # If we're installing to lib64, check lib for orphans.
- # If we're installing to lib, check lib64 for orphans.
- # Otherwise, leave _oldmoddir empty.
- ifeq ($(findstring /lib64/,$(_current_moddir)),/lib64/)
- _oldmoddir = $(subst /lib64/,/lib/,$(_current_moddir))
- else ifeq ($(findstring /lib/,$(_current_moddir)),/lib/)
- _oldmoddir = $(subst /lib/,/lib64/,$(_current_moddir))
- endif
- endif
- check-old-libdir:
- @test -n "$(_oldlibdir)" -a -d "$(_oldlibdir)" || exit 0 ;\
- oldfiles=`find "$(_oldlibdir)" -name libasterisk* -print -quit -o \( -path *asterisk/modules/* -a -name *.so \) -print -quit 2>/dev/null` ;\
- if [ "x$$oldfiles" != "x" ] ; then \
- echo " WARNING WARNING WARNING" ;\
- echo "" ;\
- echo " Installation is to: " ;\
- echo " $(DESTDIR)$(ASTLIBDIR)" ;\
- echo " but there are asterisk shared libraries in: " ;\
- echo " $(_oldlibdir)" ;\
- echo " or" ;\
- echo " $(_oldlibdir)/asterisk/modules" ;\
- echo "" ;\
- echo " It is unlikely that asterisk will start." ;\
- echo "" ;\
- echo " You should do one of the following..." ;\
- echo " * Run 'make uninstall' to remove the incorrect libraries" ;\
- echo " then run 'make install' again." ;\
- echo " * Manually remove the libraries from" ;\
- echo " $(_oldlibdir)" ;\
- echo " and run 'ldconfig' to rebuild the linker cache." ;\
- echo "" ;\
- echo " WARNING WARNING WARNING" ;\
- fi
- badshell:
- ifneq ($(filter ~%,$(DESTDIR)),)
- @echo "Your shell doesn't do ~ expansion when expected (specifically, when doing \"make install DESTDIR=~/path\")."
- @echo "Try replacing ~ with \$$HOME, as in \"make install DESTDIR=\$$HOME/path\"."
- @exit 1
- endif
- versioncheck:
- ifeq ($(ASTERISKVERSION),UNKNOWN__git_check_fail)
- @echo "Asterisk Version is unknown due to a git error. If you are running make"
- @echo "as a different user than the project owner, this can be resolved by"
- @echo "running the following command as the user currently executing make: "$$USER
- @echo "git config --global --add safe.directory "$(mkfile_dir:/=)
- @exit 1
- endif
- install: badshell versioncheck bininstall datafiles
- @if [ -x /usr/sbin/asterisk-post-install ]; then \
- /usr/sbin/asterisk-post-install "$(DESTDIR)" . ; \
- fi
- @echo " +---- Asterisk Installation Complete -------+"
- @echo " + +"
- @echo " + YOU MUST READ THE SECURITY DOCUMENT +"
- @echo " + +"
- @echo " + Asterisk has successfully been installed. +"
- @echo " + If you would like to install the sample +"
- @echo " + configuration files (overwriting any +"
- @echo " + existing config files), run: +"
- @echo " + +"
- @echo " + For generic reference documentation: +"
- @echo " + $(mK) samples +"
- @echo " + +"
- @echo " + For a sample basic PBX: +"
- @echo " + $(mK) basic-pbx +"
- @echo " + +"
- @echo " + +"
- @echo " +----------------- or ---------------------+"
- @echo " + +"
- @echo " + You can go ahead and install the asterisk +"
- @echo " + program documentation now or later run: +"
- @echo " + +"
- @echo " + $(mK) progdocs +"
- @echo " + +"
- @echo " + **Note** This requires that you have +"
- @echo " + doxygen installed on your local system +"
- @echo " +-------------------------------------------+"
- @$(MAKE) -s oldmodcheck
- @$(MAKE) -s ld-cache-update
- @$(MAKE) -s check-old-libdir
- isntall: install
- upgrade: bininstall
- # Install configuration files from the specified directory
- # Parameters:
- # (1) the configuration directory to install from
- # (2) the extension to strip off
- define INSTALL_CONFIGS
- @for x in $(1)/*$(2); do \
- dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x $(2)`"; \
- if [ -f "$${dst}" ]; then \
- if [ "$(OVERWRITE)" = "y" ]; then \
- if cmp -s "$${dst}" "$$x" ; then \
- echo "Config file $$x is unchanged"; \
- continue; \
- fi ; \
- mv -f "$${dst}" "$${dst}.old" ; \
- else \
- echo "Skipping config file $$x"; \
- continue; \
- fi ;\
- fi ; \
- echo "Installing file $$x"; \
- $(INSTALL) -m 644 "$$x" "$${dst}" ;\
- done ; \
- if [ "$(OVERWRITE)" = "y" ]; then \
- echo "Updating asterisk.conf" ; \
- sed -e 's|^astcachedir.*$$|astcachedir => $(ASTCACHEDIR)|' \
- -e 's|^astetcdir.*$$|astetcdir => $(ASTETCDIR)|' \
- -e 's|^astmoddir.*$$|astmoddir => $(ASTMODDIR)|' \
- -e 's|^astvarlibdir.*$$|astvarlibdir => $(ASTVARLIBDIR)|' \
- -e 's|^astdbdir.*$$|astdbdir => $(ASTDBDIR)|' \
- -e 's|^astkeydir.*$$|astkeydir => $(ASTKEYDIR)|' \
- -e 's|^astdatadir.*$$|astdatadir => $(ASTDATADIR)|' \
- -e 's|^astagidir.*$$|astagidir => $(AGI_DIR)|' \
- -e 's|^astspooldir.*$$|astspooldir => $(ASTSPOOLDIR)|' \
- -e 's|^astrundir.*$$|astrundir => $(ASTVARRUNDIR)|' \
- -e 's|^astlogdir.*$$|astlogdir => $(ASTLOGDIR)|' \
- -e 's|^astsbindir.*$$|astsbindir => $(ASTSBINDIR)|' \
- "$(DESTDIR)$(ASTCONFPATH)" > "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
- $(INSTALL) -m 644 "$(DESTDIR)$(ASTCONFPATH).tmp" "$(DESTDIR)$(ASTCONFPATH)" ; \
- rm -f "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
- fi
- endef
- install-headers:
- # Will create all components of "$(DESTDIR)$(ASTHEADERDIR)/doxygen" including "$(DESTDIR)$(includedir)"
- $(INSTALL) -d "$(DESTDIR)$(ASTHEADERDIR)/doxygen"
- $(INSTALL) -m 644 include/asterisk.h "$(DESTDIR)$(includedir)"
- $(INSTALL) -m 644 include/asterisk/*.h "$(DESTDIR)$(ASTHEADERDIR)"
- $(INSTALL) -m 644 include/asterisk/doxygen/*.h "$(DESTDIR)$(ASTHEADERDIR)/doxygen"
- if [ -n "$(OLDHEADERS)" ]; then \
- for h in $(OLDHEADERS); do rm -f "$(DESTDIR)$(ASTHEADERDIR)/$$h"; done \
- fi
- install-configs:
- @if test -z "$(CONFIG_SRC)" -o ! -d "$(CONFIG_SRC)"; then \
- >&2 echo "CONFIG_SRC must be set to a directory."; \
- exit 1; \
- fi
- @echo "Installing config files from $(CONFIG_SRC)/*$(CONFIG_EXTEN)"
- $(call INSTALL_CONFIGS,$(CONFIG_SRC),$(CONFIG_EXTEN))
- # XXX why *.adsi is installed first ?
- adsi:
- @echo Installing adsi config files...
- $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)"
- @for x in configs/samples/*.adsi; do \
- dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
- if [ -f "$${dst}" ] ; then \
- echo "Overwriting $$x" ; \
- else \
- echo "Installing $$x" ; \
- fi ; \
- $(INSTALL) -m 644 "$$x" "$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
- done
- samples: adsi
- @echo Installing other config files...
- $(call INSTALL_CONFIGS,configs/samples,.sample)
- $(INSTALL) -d "$(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX"
- build_tools/make_sample_voicemail "$(DESTDIR)/$(ASTDATADIR)" "$(DESTDIR)/$(ASTSPOOLDIR)"
- @for x in phoneprov/*; do \
- dst="$(DESTDIR)$(ASTDATADIR)/$$x" ; \
- if [ -f "$${dst}" ]; then \
- if [ "$(OVERWRITE)" = "y" ]; then \
- if cmp -s "$${dst}" "$$x" ; then \
- echo "Config file $$x is unchanged"; \
- continue; \
- fi ; \
- mv -f "$${dst}" "$${dst}.old" ; \
- else \
- echo "Skipping config file $$x"; \
- continue; \
- fi ;\
- fi ; \
- echo "Installing file $$x"; \
- $(INSTALL) -m 644 "$$x" "$${dst}" ;\
- done
- basic-pbx:
- @echo Installing basic-pbx config files...
- $(call INSTALL_CONFIGS,configs/basic-pbx)
- webvmail:
- @[ -d "$(DESTDIR)$(HTTP_DOCSDIR)/" ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
- @[ -d "$(DESTDIR)$(HTTP_CGIDIR)" ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
- $(INSTALL) -m 4755 contrib/scripts/vmail.cgi "$(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi"
- $(INSTALL) -d "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk"
- for x in images/*.gif; do \
- $(INSTALL) -m 644 $$x "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/"; \
- done
- @echo " +--------- Asterisk Web Voicemail ----------+"
- @echo " + +"
- @echo " + Asterisk Web Voicemail is installed in +"
- @echo " + your cgi-bin directory: +"
- @echo " + $(DESTDIR)$(HTTP_CGIDIR)"
- @echo " + IT USES A SETUID ROOT PERL SCRIPT, SO +"
- @echo " + IF YOU DON'T LIKE THAT, UNINSTALL IT! +"
- @echo " + +"
- @echo " + Other static items have been stored in: +"
- @echo " + $(DESTDIR)$(HTTP_DOCSDIR)"
- @echo " + +"
- @echo " + If these paths do not match your httpd +"
- @echo " + installation, correct the definitions +"
- @echo " + in your Makefile of HTTP_CGIDIR and +"
- @echo " + HTTP_DOCSDIR +"
- @echo " + +"
- @echo " +-------------------------------------------+"
- progdocs:
- ifeq ($(DOXYGEN),:)
- @echo "Doxygen is not installed. Please install and re-run the configuration script."
- else
- @cp doc/Doxyfile.in doc/Doxyfile
- ifeq ($(DOT),:)
- @echo "DOT is not installed. Doxygen will not produce any diagrams. Please install and re-run the configuration script."
- else
- @echo "HAVE_DOT = YES" >> doc/Doxyfile
- endif
- ifneq ($(NOISY_BUILD),yes)
- @echo "EXTRACT_ALL = YES" >> doc/Doxyfile
- endif
- ifeq ($(AST_DEVMODE),yes)
- @echo "INTERNAL_DOCS = YES" >> doc/Doxyfile
- @echo "WARN_NO_PARAMDOC = YES" >> doc/Doxyfile
- endif
- ifeq ($(ASTERISKVERSION),UNKNOWN__and_probably_unsupported)
- @echo "Asterisk Version is unknown, not configuring Doxygen PROJECT_NUMBER."
- else ifeq ($(ASTERISKVERSION),UNKNOWN__git_check_fail)
- @echo "Asterisk Version is unknown due to a git error. If you are running make"
- @echo "as a different user than the project owner, this can be resolved by"
- @echo "running the following command as the user currently executing make: "$$USER
- @echo "git config --global --add safe.directory "$(mkfile_dir:/=)
- @echo "not configuring Doxygen PROJECT_NUMBER."
- else
- @echo "PROJECT_NUMBER = $(ASTERISKVERSION)" >> doc/Doxyfile
- endif
- @echo "Generating C-API documentation. This will take a while."
- @doxygen doc/Doxyfile
- @echo "Generation complete. Any warnings are in ./doxygen.log."
- endif
- install-logrotate:
- if [ ! -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ]; then \
- $(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ; \
- fi
- sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
- $(INSTALL) -m 0644 contrib/scripts/asterisk.logrotate.tmp "$(DESTDIR)$(ASTETCDIR)/../logrotate.d/asterisk"
- rm -f contrib/scripts/asterisk.logrotate.tmp
- config:
- @if [ -f /etc/redhat-release -o -f /etc/fedora-release ]; then \
- ./build_tools/install_subst contrib/init.d/rc.redhat.asterisk "$(DESTDIR)/etc/rc.d/init.d/asterisk"; \
- if [ ! -f "$(DESTDIR)/etc/sysconfig/asterisk" ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
- fi ; \
- if [ -z "$(DESTDIR)" ] ; then \
- /sbin/chkconfig --add asterisk ; \
- fi ; \
- elif [ -f /etc/debian_version ] ; then \
- ./build_tools/install_subst contrib/init.d/rc.debian.asterisk "$(DESTDIR)/etc/init.d/asterisk"; \
- if [ ! -f "$(DESTDIR)/etc/default/asterisk" ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/default/asterisk" ; \
- fi ; \
- if [ -z "$(DESTDIR)" ] ; then \
- /usr/sbin/update-rc.d asterisk defaults 50 91 ; \
- fi ; \
- elif [ -f /etc/gentoo-release ] ; then \
- ./build_tools/install_subst contrib/init.d/rc.gentoo.asterisk "$(DESTDIR)/etc/init.d/asterisk"; \
- if [ -z "$(DESTDIR)" ] ; then \
- /sbin/rc-update add asterisk default ; \
- fi ; \
- elif [ -f /etc/mandrake-release -o -f /etc/mandriva-release ] ; then \
- ./build_tools/install_subst contrib/init.d/rc.mandriva.asterisk "$(DESTDIR)/etc/rc.d/init.d/asterisk"; \
- if [ ! -f /etc/sysconfig/asterisk ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
- fi ; \
- if [ -z "$(DESTDIR)" ] ; then \
- /sbin/chkconfig --add asterisk ; \
- fi ; \
- elif [ -f /etc/SuSE-release -o -f /etc/novell-release ] ; then \
- ./build_tools/install_subst contrib/init.d/rc.suse.asterisk "$(DESTDIR)/etc/init.d/asterisk"; \
- if [ ! -f /etc/sysconfig/asterisk ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
- fi ; \
- if [ -z "$(DESTDIR)" ] ; then \
- /sbin/chkconfig --add asterisk ; \
- fi ; \
- elif [ -f /etc/os-release ] && [ "opensuse" = "$(shell . /etc/os-release 2>/dev/null && echo $$ID)" ] ; then \
- ./build_tools/install_subst contrib/init.d/rc.suse.asterisk "$(DESTDIR)/etc/init.d/asterisk"; \
- if [ ! -f /etc/sysconfig/asterisk ] ; then \
- $(INSTALL) -m 644 contrib/init.d/etc_default_asterisk "$(DESTDIR)/etc/sysconfig/asterisk" ; \
- fi ; \
- if [ -z "$(DESTDIR)" ] ; then \
- /sbin/chkconfig --add asterisk ; \
- fi ; \
- elif [ -f /etc/arch-release -o -f /etc/arch-release ] ; then \
- ./build_tools/install_subst contrib/init.d/rc.archlinux.asterisk "$(DESTDIR)/etc/init.d/asterisk"; \
- elif [ -f /etc/slackware-version ]; then \
- ./build_tools/install_subst contrib/init.d/rc.slackware.asterisk "$(DESTDIR)/etc/rc.d/rc.asterisk"; \
- elif [ -f /etc/os-release ] && [ "slackware" = "$(shell . /etc/os-release 2>/dev/null && echo $$ID)" ] ; then \
- ./build_tools/install_subst contrib/init.d/rc.slackware.asterisk "$(DESTDIR)/etc/rc.d/rc.asterisk"; \
- elif [ -d "$(DESTDIR)/Library/LaunchDaemons" ]; then \
- if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist" ]; then \
- ./build_tools/install_subst contrib/init.d/org.asterisk.asterisk.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.asterisk.plist"; \
- fi; \
- if [ ! -f "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist" ]; then \
- ./build_tools/install_subst contrib/init.d/org.asterisk.muted.plist "$(DESTDIR)/Library/LaunchDaemons/org.asterisk.muted.plist"; \
- fi; \
- else \
- echo "We could not install init scripts for your distribution." ; \
- fi
- sounds:
- $(MAKE) -C sounds all
- # If the cleancount has been changed, force a make clean.
- # .cleancount is the global clean count, and .lastclean is the
- # last clean count we had
- .lastclean: .cleancount
- @$(MAKE) clean
- @[ -f "$(DESTDIR)$(ASTDBDIR)/astdb.sqlite3" ] || [ ! -f "$(DESTDIR)$(ASTDBDIR)/astdb" ] || [ ! -f menuselect.makeopts ] || grep -q MENUSELECT_UTILS=.*astdb2sqlite3 menuselect.makeopts || (sed -i.orig -e's/MENUSELECT_UTILS=\(.*\)/MENUSELECT_UTILS=\1 astdb2sqlite3/' menuselect.makeopts && echo "Updating menuselect.makeopts to include astdb2sqlite3" && echo "Original version backed up to menuselect.makeopts.orig")
- $(SUBDIRS_UNINSTALL):
- +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTDATADIR="$(ASTDATADIR)" $(SUBMAKE) -C $(@:-uninstall=) uninstall
- main-binuninstall:
- +@DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" ASTLIBDIR="$(ASTLIBDIR)" $(SUBMAKE) -C main binuninstall
- uninstall-headers:
- rm -rf "$(DESTDIR)$(ASTHEADERDIR)"
- rm -f "$(DESTDIR)$(includedir)/asterisk.h"
- _uninstall: $(SUBDIRS_UNINSTALL) main-binuninstall
- rm -f "$(DESTDIR)$(ASTMODDIR)/"*
- test -n "$(_oldmoddir)" -a -d "$(_oldmoddir)" && rm -f "$(_oldmoddir)/"* || :
- rm -f "$(DESTDIR)$(ASTSBINDIR)/astgenkey"
- rm -f "$(DESTDIR)$(ASTSBINDIR)/autosupport"
- rm -rf "$(DESTDIR)$(ASTDATADIR)/firmware"
- rm -f "$(DESTDIR)$(ASTMANDIR)/man8/asterisk.8"
- rm -f "$(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8"
- rm -f "$(DESTDIR)$(ASTMANDIR)/man8/autosupport.8"
- rm -f "$(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8"
- ifeq ($(HAVE_DAHDI),1)
- rm -f $(DESTDIR)$(DAHDI_UDEV_HOOK_DIR)/40-asterisk
- endif
- $(MAKE) -C sounds uninstall
- ifeq ($(LDCONFIG),)
- else ifeq ($(LDCONFIG),:)
- else
- $(LDCONFIG) "$(ASTLIBDIR)/" || :
- endif
- uninstall: _uninstall
- @echo " +--------- Asterisk Uninstall Complete -----+"
- @echo " + Asterisk binaries, sounds, man pages, +"
- @echo " + headers, modules, and firmware builds, +"
- @echo " + have all been uninstalled. +"
- @echo " + +"
- @echo " + To remove ALL traces of Asterisk, +"
- @echo " + including configuration, spool +"
- @echo " + directories, and logs, run the following +"
- @echo " + command: +"
- @echo " + +"
- @echo " + $(mK) uninstall-all +"
- @echo " +-------------------------------------------+"
- uninstall-all: _uninstall uninstall-headers
- rm -rf "$(DESTDIR)$(ASTMODDIR)"
- test -n "$(_oldmoddir)" -a -d "$(_oldmoddir)" && rm -rf "$(_oldmoddir)" || :
- rm -rf "$(DESTDIR)$(ASTVARLIBDIR)"
- rm -rf "$(DESTDIR)$(ASTDATADIR)"
- rm -rf "$(DESTDIR)$(ASTSPOOLDIR)"
- rm -rf "$(DESTDIR)$(ASTETCDIR)"
- rm -rf "$(DESTDIR)$(ASTLOGDIR)"
- rm -rf "$(DESTDIR)$(ASTCACHEDIR)"
- menuconfig: menuselect
- cmenuconfig: cmenuselect
- gmenuconfig: gmenuselect
- nmenuconfig: nmenuselect
- menuselect: menuselect/cmenuselect menuselect/nmenuselect menuselect/gmenuselect
- @if [ -x menuselect/nmenuselect ]; then \
- $(MAKE) nmenuselect; \
- elif [ -x menuselect/cmenuselect ]; then \
- $(MAKE) cmenuselect; \
- elif [ -x menuselect/gmenuselect ]; then \
- $(MAKE) gmenuselect; \
- else \
- echo "No menuselect user interface found. Install ncurses,"; \
- echo "newt or GTK libraries to build one and re-rerun"; \
- echo "'./configure' and 'make menuselect'."; \
- fi
- cmenuselect: menuselect/cmenuselect menuselect-tree menuselect.makeopts
- -@menuselect/cmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
- gmenuselect: menuselect/gmenuselect menuselect-tree menuselect.makeopts
- -@menuselect/gmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
- nmenuselect: menuselect/nmenuselect menuselect-tree menuselect.makeopts
- -@menuselect/nmenuselect menuselect.makeopts && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
- # options for make in menuselect/
- MAKE_MENUSELECT=CC="$(BUILD_CC)" CXX="$(CXX)" LD="" AR="" RANLIB="" \
- CFLAGS="$(BUILD_CFLAGS)" LDFLAGS="$(BUILD_LDFLAGS)" \
- $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
- menuselect/menuselect: menuselect/makeopts .lastclean
- +$(MAKE_MENUSELECT) menuselect
- menuselect/cmenuselect: menuselect/makeopts .lastclean
- +$(MAKE_MENUSELECT) cmenuselect
- menuselect/gmenuselect: menuselect/makeopts .lastclean
- +$(MAKE_MENUSELECT) gmenuselect
- menuselect/nmenuselect: menuselect/makeopts .lastclean
- +$(MAKE_MENUSELECT) nmenuselect
- menuselect/makeopts: makeopts .lastclean
- +$(MAKE_MENUSELECT) makeopts
- menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc) $(wildcard $(dir)/*.xml)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml utils/utils.xml agi/agi.xml configure makeopts
- @echo "Generating input for menuselect ..."
- @echo "<?xml version=\"1.0\"?>" > $@
- @echo >> $@
- @echo "<menu name=\"Asterisk Module and Build Option Selection\">" >> $@
- +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} moduleinfo >> $@; done
- @cat build_tools/cflags.xml >> $@
- +@for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SILENTMAKE) -C $${dir} SUBDIR=$${dir} makeopts >> $@; done
- @if [ "${AST_DEVMODE}" = "yes" ]; then \
- cat build_tools/cflags-devmode.xml >> $@; \
- fi
- @cat utils/utils.xml >> $@
- @cat agi/agi.xml >> $@
- @cat sounds/sounds.xml >> $@
- @echo "</menu>" >> $@
- # We don't want to require Python or Pystache for every build, so this is its
- # own target.
- ari-stubs:
- ifeq ($(PYTHON),:)
- @echo "--------------------------------------------------------------------------"
- @echo "--- Please install python to build ARI stubs ---"
- @echo "--------------------------------------------------------------------------"
- @false
- else
- @$(INSTALL) -d doc/rest-api
- $(PYTHON) rest-api-templates/make_ari_stubs.py \
- --resources rest-api/resources.json --source-dir $(ASTTOPDIR) \
- --dest-dir $(ASTTOPDIR)/doc/rest-api --docs-prefix ../
- endif
- check-alembic: makeopts
- @find contrib/ast-db-manage/ -name '*.pyc' -delete
- @ALEMBIC=$(ALEMBIC) build_tools/make_check_alembic config cdr voicemail >&2
- .PHONY: install-configs
- .PHONY: install-headers
- .PHONY: menuselect
- .PHONY: main
- .PHONY: sounds
- .PHONY: clean
- .PHONY: dist-clean
- .PHONY: distclean
- .PHONY: all
- .PHONY: _all
- .PHONY: full
- .PHONY: _full
- .PHONY: uninstall
- .PHONY: _uninstall
- .PHONY: uninstall-all
- .PHONY: uninstall-headers
- .PHONY: badshell
- .PHONY: installdirs
- .PHONY: progdocs
- .PHONY: validate-docs
- .PHONY: _clean
- .PHONY: ari-stubs
- .PHONY: basic-pbx
- .PHONY: check-alembic
- .PHONY: ld-cache-update
- .PHONY: check-old-libdir
- .PHONY: $(SUBDIRS_INSTALL)
- .PHONY: $(SUBDIRS_DIST_CLEAN)
- .PHONY: $(SUBDIRS_CLEAN)
- .PHONY: $(SUBDIRS_UNINSTALL)
- .PHONY: $(SUBDIRS)
- FORCE:
- # This only stops targets within the root Makefile from building in parallel.
- .NOTPARALLEL:
|